- Contractors
Welcome !
Builders Fence Company has been family owned and operated since incorporating in 1959. We are the regular supplier of chain link and ornamental iron to thousands of fence contractors in the Western United States, and a leading manufacturer of ornamental iron fences and gates, which we ship nationwide and into Canada.
BFC is known for responsive service, loyalty and consistency. We maintain long-term relationships with contractors who value responsiveness and reliability. Please include us the next time you are looking for a materials quote.
- Property Owners
Welcome !
Builders Fence Company is a manufacturer and distributor of fence materials. We do not install fencing.
Property owners who need fencing installed or repaired should work with a licensed contractor.
BFC can refer you to a contractor in your area. Call your closest BFC office.
- Architects • Engineers • Specifiers
- History
BFC Residential Iron Fencing adds both beauty and security to any home.
STANDARD SIZES
| Heights | Lengths |
| 3' | 94", 120", & 143 1/2" |
| 4' | 94", 120", & 143 1/2" |
| 5' | 94", 120", & 143 1/2" |
| 6' | 94", 120", & 143 1/2" |
| RESIDENTIAL
|
Rails
|
Pickets
|
On Center
|
|---|---|---|---|
| REGAL | 1" x 1" 16ga | 5/8" x 5/8" 18ga | 4 1/2" |
| ARISTOCRAT | 1" x 1" 16ga | 5/8" x 5/8" 18ga | 4 1/2" |
| MODERN | 1" x 1" 16ga | 5/8" x 5/8" 18ga | 4 1/2" |
| EMPIRE | 1" x 1" 16ga | 5/8" x 5/8" 18ga | 4 1/2" |
| NAPOLEON | 1" x 1" 16ga | 5/8" x 5/8" 18ga | 4 1/2" |
RECOMMENDED FINISH
Galva-Guard I Pre-Galvanized Tubing and Polyurethane Painted Materials are fabricated using galvanized tubing and finished with one spray coat high solids primer and one spray coat of high solids gloss black polyurethane paint.
GATE AVAILABILITY
Single swing, double swing, ground track sliding & full cantilever slide gates. Custom lengths can be manufactured at either nominal or no additional costs.
Single swing, double swing, ground track sliding & full cantilever slide gates. Custom lengths can be manufactured at either nominal or no additional costs.
POSTS
Posts are supplied according to weight and size of fence material. They are available for dirt-set, concrete-set or flange mounting.
Posts are supplied according to weight and size of fence material. They are available for dirt-set, concrete-set or flange mounting.
INSTALLATION
All fence panels and gates are delivered prepared for welded installation. BFC offers wall mount and post mounting brackets if required.
All fence panels and gates are delivered prepared for welded installation. BFC offers wall mount and post mounting brackets if required.
OPTIONS
BFC's Residential Iron Fencing offers endless choices of twisted pickets, scroll work, cast iron finials, rings, flame-cut letters and arching rails providing a unique design for the home.
BFC's Residential Iron Fencing offers endless choices of twisted pickets, scroll work, cast iron finials, rings, flame-cut letters and arching rails providing a unique design for the home.
STANDARD SIZES
| Heights | Lengths |
| 5' | 94" & 118" |
| 6' | 94" & 118" |
| 7' | 94" & 118" |
| 8' | 94" & 118" |
| Heights | Lengths |
| 7' | 94" |
| 8' | 94" |
| 9' | 94" |
| 10' | 94" |
| HEAVY
|
Rails
|
Pickets
|
On Center
|
|---|---|---|---|
| REGAL | 1 1/2" x 1 1/2" 14ga | 3/4" x 3/4" 16ga | 4 3/4" or 6" |
| ARISTOCRAT | 1 1/2" x 1 1/2" 14ga | 3/4" x 3/4" 16ga | 4 3/4" or 6" |
| GUARDIAN | 1 1/2" x 1 1/2" 14ga | 3/4" x 3/4" 16ga | 4 3/4" or 6"" |
PICKETS
3/4" X 3/4" 16 ga. steel tube at 4-3/4" O.C. or 6" O.C.
3/4" X 3/4" 16 ga. steel tube at 4-3/4" O.C. or 6" O.C.
POSTS
2" x 2" 14 or 11 ga. steel tube with pressed steel cap. Space posts at 8' O.C. or 10' O.C.
2" x 2" 14 or 11 ga. steel tube with pressed steel cap. Space posts at 8' O.C. or 10' O.C.
SWING GATES
Framework as required for size, but not less than that of panels. Pickets to match panels. Hardware as required. Trussing and heavier posts may be necessary.
Framework as required for size, but not less than that of panels. Pickets to match panels. Hardware as required. Trussing and heavier posts may be necessary.
SLIDE GATES
2" x 2" x 11 ga. steel tube top rail and verticals. Bottom rail shall be 2" x 4" x 11 ga. steel tube with wheel housings. Ground track to be angle iron (sized per requirements) with #4 rebar hooks welded at 24" O.C. Wheels shall be 6" diameter V-Groove type with grease fitting and needle bearings. Upper guides to be BFC Type I roller assemblies with 2" diameter hard rubber rollers, 1/2" axle, and bronze bushings. Safety posts to be minimum 4" sq. 11 ga. steel tube.
2" x 2" x 11 ga. steel tube top rail and verticals. Bottom rail shall be 2" x 4" x 11 ga. steel tube with wheel housings. Ground track to be angle iron (sized per requirements) with #4 rebar hooks welded at 24" O.C. Wheels shall be 6" diameter V-Groove type with grease fitting and needle bearings. Upper guides to be BFC Type I roller assemblies with 2" diameter hard rubber rollers, 1/2" axle, and bronze bushings. Safety posts to be minimum 4" sq. 11 ga. steel tube.
RECOMMENDED FINISH
Galva-Guard I
Pre-Galvanized Tubing and Polyurethane Painted Materials are fabricated using galvanized tubing and finished with one spray coat high solids primer and one spray coat of high solids gloss black polyurethane paint.
Galva-Guard I
Pre-Galvanized Tubing and Polyurethane Painted Materials are fabricated using galvanized tubing and finished with one spray coat high solids primer and one spray coat of high solids gloss black polyurethane paint.
STANDARD SIZES
| Heights | Lengths |
| 5' | 94" & 118" |
| 6' | 94" & 118" |
| 7' | 94" & 118" |
| 8' | 94" & 118" |
| Heights | Lengths |
| 7' | 94" |
| 8' | 94" |
| 9' | 94" |
| 10' | 94" |
| XTRA-HEAVY |
Rails |
Pickets
|
On Center
|
|---|---|---|---|
| REGAL | 2" x 2" 14ga | 1" x 1" 16ga | 5" or 6" |
| ARISTOCRAT | 2" x 2" 14ga | 1" x 1" 16ga | 5" or 6" |
| GUARDIAN | 2" x 2" 14ga | 1" x 1" 16ga | 5" or 6" |
SLIDE GATES
2" x 2" x 11 ga. steel tube top rail and verticals. Bottom rail shall be 2" x 4" x 11 ga. steel tube with wheelhousings. Ground track to be angle iron (sized per requirements) with #4 rebar hooks welded at 24" O.C. Wheels shall be 6" diameter V-Groove type with grease fitting and needle bearings. Upper guides to be BFC Type I roller assemblies with 2" diameter hard rubber rollers, 1/2" axle, and bronze bushings. Safety posts to be minimum 4" sq. 11 ga. steel tube.
2" x 2" x 11 ga. steel tube top rail and verticals. Bottom rail shall be 2" x 4" x 11 ga. steel tube with wheelhousings. Ground track to be angle iron (sized per requirements) with #4 rebar hooks welded at 24" O.C. Wheels shall be 6" diameter V-Groove type with grease fitting and needle bearings. Upper guides to be BFC Type I roller assemblies with 2" diameter hard rubber rollers, 1/2" axle, and bronze bushings. Safety posts to be minimum 4" sq. 11 ga. steel tube.
POSTS
2" x 2" 14 or 11 ga. steel tube with pressed steel cap. Space posts at 8' O.C. or 10' O.C.
2" x 2" 14 or 11 ga. steel tube with pressed steel cap. Space posts at 8' O.C. or 10' O.C.
SWING GATES
Framework as required for size, but not less than that of panels. Pickets to match panels. Hardware as required. Trussing and heavier posts may be necessary.
Framework as required for size, but not less than that of panels. Pickets to match panels. Hardware as required. Trussing and heavier posts may be necessary.
RECOMMENDED FINISH
Galva-Guard I
Pre-Galvanized Tubing and Polyurethane Painted Materials are fabricated using galvanized tubing and finished with one spray coat high solids primer and one spray coat of high solids gloss black polyurethane paint.
Galva-Guard I
Pre-Galvanized Tubing and Polyurethane Painted Materials are fabricated using galvanized tubing and finished with one spray coat high solids primer and one spray coat of high solids gloss black polyurethane paint.
